WHY

 One of the most difficult industrial issues related to tribology is the prediction of long term wear or material durability.  In many components and products, materials with or without lubrication are used to reduce wear and maintain functionality of the component.  Required ‘wear life’ may be thousands of hours.  Contrary to the determination of a ‘coefficient of friction’ – which can be done in a few hours, the determination of wear and wear rate under realistic conditions is a long term test. The challenge is twofold : perform low wear rate experiments with many repeats at an economically acceptable cost.  The only way to do this is by a multistation approach (performing many wear experiments simultaneously). 

HOW

Parallel tests were performed in our TRL6 prototype 10-station cross-cylinder block-on-cylinder tester. With this method, we test parallel and simultaneously different bulk or coated materials (metals, alloys, polymers, ceramics and composites), at moderate contact pressures and for a prolonged period of time. Adhesive or mild abrasive wear mechanisms are representative for the “actual” applications.

 

 

b2ap3_thumbnail_10-station Applications   

 

RESULT

Efficient screening showed

b2ap3_thumbnail_10-station_ranking-polymers Applications